Global Machinery Company ULB2400 User Manual

Page 9

Extension cord support

During use of the blower vac, the extension cord will

continually be pulled as you move from one area to another.
An extension cord support has been provided on the

housing of the blower vac to assist in preventing the

electrical connection between the extension cord and

blower vac plug being forced apart.

Note.

The support is for the extension cord, and not the

cable from the blower vac.
1. To fit the extension cord to the support, make a tight

loop in the extension cord, approximately 300mm from

the socket on the extension cord.

2. Fit the loop into the

square recess in the back

portion of the blower vac

on the underside of the

housing (fig A).

3. Push the loop all the way

through the housing by

approximately 25mm.

4. Push each side of the loop

downwards so each side of

the loop fits over the hook

inside the recess (fig B).

5. After, and only after the

cable is correctly seated,

plug the blower vac plug

into the socket of the

extension cable.

Operation of the blower vac

Prior to using the blower vac, ensure you have read and

understood this instruction manual.
Ensure you are wearing suitable clothing and also safety

equipment like safety glasses, ear protection and a mask

if necessary.
Ensure the attachments to the blower vac are correctly

fitted and adjusted.
Be aware of other people and animals in the area where

you are to be operating the blower vac.

To turn the blower vac on

1. Plug the power cord into an approved electrical

extension cord, and turn the extension cord on.

2. Ensuring the blower vac is

directed in a safe direction,

push the lock-off switch

forward and depress the

trigger switch, the blower

vac will start (fig A).

While holding the trigger

switch the blower vac will

continue to operate without

the need to hold the lock-off

switch.

To turn the blower vac off

To turn the blower vac “off”, simply release the trigger switch.

Important.

After you have turned the blower vac off, do

not leave the product until the blower vac has been fully

disconnected from the electrical supply.