GE DMCD330 - Manual (Page 7)

7
Safety Instructions
Care and Cleaning
Consumer Support
Operating Instructions
Countdown display. (DCCD models only)
ge.com
The countdown display shows the remaining operating time as well as the current drying cycle. The
display board is configured for a 45-minute dry time at the factory to correspond with the 45-minute
timer cam pre-installed in the coin box. If the timer cam is modified for another operating duration,
the dip switches on the display board should be set as follows:
NOTE: This display does not accumulate time. See the following examples of display possibilities.
DIP SWITCH NUMBERS
DRYING TIME (minutes) 1 2
45 1 1
60 1 0
90 0 1
120 0 0
DIP SWITCH SETTING (min) COIN SLIDE ACTUATIONS DISPLAY READING (min)
45 1 45 to 0, then blank
45 2 45 to 1, then 1 for next 45 min.,
then 0 and blank
120 1 99 for 21 minutes, then 98 to 0,
then blank