Great Dane Scamper HG GDB10028 - Manual (Page 29)

Service Miscellaneous - 26
SERVICE MISCELLANEOUS
and caster yoke and wheel assembly (D).
4. Remove and discard upper (E) and lower (F) bushings.
5. Install new bushings (E and F).
6. Install caster yoke and wheel assembly (D), washer (C),
spacer bushings (B) and lynch pin (A).
7. Apply grease to lubrication fitting (G).
Checking Wheel Nuts
Tighten rear wheel nuts in an alternating pattern to 68N•m
(50 lb-ft).