GE 15298530 User Manual
Page 17
17
C
ALLER
ID
Caller ID information is retrieved between the
first and second ring.
In the display, the unit shows the number of
calls, the caller's name, the caller's telephone
number, the day and time.
The name, telephone number, time and day of
a call are recorded.
SETTING
THE
AREA
CODE
1.
Hold the DIAL button until the unit
announces the first number.
2.
Press the REVIEW or SKIP buttons to
scroll through the numbers until you reach
the first number of the area code.
3.
Press the DIAL button to set the first
number.
4.
Repeat Steps 2 and 3 for the next two
numbers.
When the DIAL button is pressed after the
third number, the unit announces the area
code for confirmation.
If no area code is set, the unit always dials the
area code with the number.
RETRIEVING
INFORMATION
1.
Press the CID button. The display shows
"
X new calls" or "X calls," if they are old.
2.
Press the REVIEW or SKIP button to
scroll through the stored information.
The unit displays "
end of list" when there is no
more information to show.
To play messages while in CID mode, press the
PLAY button when you find an entry with a
message attached.
4.
Press the CID button to exit the CID mode
and return to the Idle mode.