GE RM94940 User Manual

Page 12

Programming For CD

1. Manually turn on the CD player. Find the three

digit code for your CD player you wish to control at

the back of the instructions.

2. Press and hold the CODESEARCH button

until the INDICATOR LIGHT lights, then release the

CODE SEARCH button.

3. Press and release the

CD button (The INDICA-

TOR LIGHT will blink then

remain lit.

4. Enter the code using the

Number Buttons. After your

code is entered, the INDI-

CATOR LIGHT will turn

off. If the code is not valid,

the INDICATOR LIGHT

will blink. Check the code

list and repeat process.

5. Aim the remote at the

device you wish to control

and press the ON•OFF but-

ton. The device should turn

off.

6. With your device on,

press CHAN+ (Channel

Up). If the device responds,

no further programming is

required.

NOTE: If your device does

not respond, try all the

codes for your brand. If the

codes do not work, or your

brand is not listed, try the Code Search method on

Page 12.

7. Enter your code and the

type of device you

programmed here for

easy reference.

CD CODE

94940 Revised Size 10/18/02 12:22 PM Page 12