Global Machinery Company LS211 - Manual (Page 2)

Contents
Full 2 Years Home Use Warranty
Whilst every effort is made to ensure your complete
satisfaction with this tool, occasionally, due to the mass
manufacturing techniques, a tool may not live up to our
required level of performance and you may need the
assistance of our service department.
This product is warranted for a 2-year period for home
domestic use from the date of the original purchase. If
found to be defective in materials or workmanship, the
tool or the offending faulty component will be replaced
free of charge with another of the same item. A small
freight charge may apply.
The warranty replacement unit is only made available by
returning the tool to the place of purchase with a
confirmed register receipt. Proof of purchase is essential.
We reserve the right to reject any claim where the
purchase cannot be verified.
This warranty does not include damage or defects to the
tool caused by or resulting from abuse, accidents,
alterations or commercial or business use.
It also does not cover any bonus accessories unless the
tool is a GMC Platinum Professional model.
Please ensure that you store your receipt in a safe place.
Conditions apply to the above warranty.
If you need direction of what constitutes a free of
charge warranty claim, please review the guide given on
the rear of the Receipt Holder. An indication is given as
to the types of claim that are permissible, and those
that are not.
2
Warranty 2
Introduction 3
Environmental protection 3
Description of symbols 3
Specifications 3
Safety rules for laser lights 4
General safety instructions 4
Additional safety rules for mitre saws 6
Accessories 8
Know your product 9
Unpacking 10
Transportation 10
Bench mounting 10
Release knob 10
Mitre table locks 11
Bevel lock 11
Spindle lock button 11
Rotating lower blade guard 11
Turning on and off 11
Turning on the REDEYE® laser line generator 11
Setting the table square with the blade 11
Setting the fence square with the table 12
Changing a blade 13
Operation 14
Cross cut 14
Bevel cut 14
Compound mitre cut 15
Adjusting the laser lines 16
Using the laser line generator 16
Maintenance 17
Power cord maintenance 17
Cleaning 17
General inspection 17