Golden Technologies GB 101 - Manual (Page 39)

Buzzaround Owner’s Manual - Updated 092605
Page 39
ASSEMBLING YOUR GB 104 BUZZAROUND ™
WARNING: DO NOT SIT ON OR OPERATE YOUR SCOOTER UNLESS THE LOCKING
MECHANISM IS SECURELY LOCKED. ACCIDENTAL SEPARATION OF THE FRAME FROM
THE REAR CARRIAGE MAY OCCUR AND CAUSE INJURY OR DAMAGE.
WARNING: BE AWARE OF ANY POSSIBLE PINCH POINTS WHEN CONNECTING THE
REAR FRAME TO THE FRONT FRAME. PLEASE NOTE WARNING LABLES AT PINCH
POINTS WHEN ASSEMBLING.
Pinch Point : A pinch point is an area where you MUST be sure your fingers DO
NOT becomes pinched between two metal areas. The greatest chance of pinch
points become possible during the assembly of the Buzzaround
™ scooter. See
photo below to become knowledgeable with this area.
1. Line up the front and the rear
components.
WARNING: WATCH
FINGER PLACEMENT!
BE CAREFUL NOT TO
PINCH YOUR FINGERS!
Battery Pack
Front Component
Seat w/ arms
Rear
Component
#1