GE Monogram GEAPPLIANCES 3828EL2001A 175D1807P416 - Manual (Page 34)

Installation Instructions
34
DRYER STARTUP
Press the POWER button.
FINAL SETUP (cont.)
POWER
NOTE: If the dryer has been exposed to
temperatures below freezing for an extended
period of time, allow it to warm up before
pressing POWER. Otherwise, the display will
not come on.
The dryer will begin a setup mode that tests
the dryer’s operation. Follow the on-screen
instructions.
CONGRATULATIONS ON THE
PURCHASE OF YOUR NEW GE
PROFILE DRYER!
A BRIEF SELF DIAGNOSTIC
WILL NOW BE RUN ON YOUR
DRYER. THIS MAY TAKE UP
TO 5 MINUTES.
OK
SERVICING
WARNING –
Label all wires
prior to disconnection when servicing
controls. Wiring errors can cause improper
and dangerous operation after
servicing/installation.
For replacement parts and other information,
refer to the Owner’s Manual for servicing
phone numbers.
4
Once the setup mode is complete, the dryer
is ready for use.
YOUR DRYER IS NOW
READY FOR YOUR USE.
PLEASE READ YOUR
USER'S MANUAL PRIOR
TO OPERATION.
OK