First turn power button on – Guardian Technologies R3010 User Manual

Page 4

1. Power Button

Before turning on make sure there is water in the unit.

Press the Power Button.

2. Warm or Cool Mist Button

Press to select warm or cool mist. Water

temperature is maintained at room temperature for cool

setting and 80 degrees for warm.

3. Spray Control Button

When you press the Spray Control Button

there are four options to choose from:

Press once for WEAK

Press twice for MIDDLE

Press three times for STRONG

Press four times for TURBO

*You will notice the lights get higher as the spray increases.

4A. Light Options - Display Button

Press the Display Button to turn the display lights ON or OFF.

5. Water Refill Button

When the Water Refill Button lights up it is time to refill

the water tank.

Program Start
1. Push Select/Set Button until "START" is blinking on display.

2. While "START" is blinking, select the desired start time using Hour and

Minute buttons (AM or PM as indicated).

3. Select Cool/Warm preference.

4. Select Spray Control preference.

5. "START" indicator will remain lit once programmed.

Power

Cool/W arm

S p

Spray

Control

Dim

Display

Lamp

4B. Light Options - Night Light Feature

Press the Lamp Button at the top of the unit to illuminate

the night light feature.

Select/Set

S tart
S top
Time

Done

set

Hour

Minute

Program Stop
1. Push Select/Set Button until "STOP" is blinking on display.

2. While "STOP" is blinking, select the desired end time using Hour and

Minute buttons (AM or PM as indicated).

3. "STOP" indicator will remain lit once programmed.

4. To cancel program, press and hold select/set button for two seconds

(START and STOP buttons will not be lit).

Clock Set
1. Clock must be set in order for timer to work properly.

2. Push Select/Set Button until "TIME" is blinking on display.

3. Select actual time using Hour and Minute Buttons (AM or PM as indicated).

The programmable mode allows you to set the timer to turn the humidifier both on/off

at a daily predetermined time. This mode also allows the clock to be programmed.

FIRST TURN POWER BUTTON ON.

E-7

E-6