Grandstream Networks HandyTone-386 User Manual

Page 17

HandyTone-386 User Manual

Grandstream Networks, Inc.

MAC Address

The device ID, in HEX format. This is a very important ID for ISP
troubleshooting.

WAN IP Address

This field shows WAN port IP address.

Product Model

This field contains the product model info.

Software Version

Program: This is the main software release, its number is always used for
firmware upgrade.
Bootloader: This is normally not changed.
HTML: This is the web user interface, normally not changed.
VOC: This is the codec program, normally not changed.

System Up Time

This field indicates how long the device has been up since the last reboot.

Registered

This field indicates whether the device is registered to the SIP server.

PPPoE Link Up

This field shows whether the PPPoE connection is enabled or not.

Detected NAT Type

This field shows what kind NAT the HandyTone is connected to via its
WAN port. It is based on STUN protocol.

6.2.3

Advanced User Configuration

To login to the Advanced User Configuration page, please follow the instructions in section 6.2.1 to
get to the following login page. The password is case sensitive and the factory default password for
Advanced User is “admin”.

Grandstream Device Configuration

Password

Advanced User configuration includes not only the end user configuration, but also advanced
configuration such as SIP configuration, Codec selection, NAT Traversal Setting and other
miscellaneous configuration. Following is a snap shot of the advanced configuration page.

Grandstream Device Configuration