Gefen EXT-DVIRS232-1FO User Manual
Page 11

8
EXT-DVIRS232-1FO
RS-232 CABLE
DVI CABLE
FIBER OPTIC CABLE
(Up to 1640 ft)
Sender
Computer
Receiver
DVI Display
d
How to Connect the
Extender for DVI and RS232 Over One Fiber Optic Cable
1.
Connect the computer (or other DVI source) to the Sender unit using the
included Locking Dual Link DVI cable.
2.
Connect the DVI display to the Receiver unit using a Dual Link DVI cable.
3.
Connect an SC-terminated fi ber optic cable to the Sender unit. Connect the
opposite end of the fi ber cable to the Receiver unit.
4.
OPTIONAL: Connect an RS-232 cable from the RS-232 serial port on the
controlling device to the RS-232 port on the Sender unit. Connect another
RS-232 serial cable from the RS-232 port on the Receiver unit to the RS-232
port of the RS-232 device.
Wiring Diagram for the
Extender for DVI and RS232 Over One Fiber Optic Cable
CONNECTING THE EXTENDER FOR DVI AND RS232
OVER ONE FIBER OPTIC CABLE
IMPORTANT: Before connecting the power supplies to the Sender unit
and the Receiver unit, see page 12 for information on calibrating the
Sender unit and Receiver unit.
ATTENTION: This product should always be connected to a grounded
electrical socket.