Goodman Mfg GHS8 - Manual

These furnaces comply with requirements
embodied in the American National Standard
/ National Standard of Canada ANSI
Z21.47·CSA-2.3 Gas Fired Central
Furnaces.
RECOGNIZE THIS SYMBOL AS A SAFETY PRECAUTION.
ATTENTION INSTALLING PERSONNEL
As a professional installer you have an obligation to know the product better than the customer. This includes all
safety precautions and related items.
Prior to actual installation, thoroughly familiarize yourself with this Instruction Manual. Pay special attention to all
safety warnings. Often during installation or repair it is possible to place yourself in a position which is more hazardous
than when the unit is in operation.
Remember, it is your responsibility to install the product safely and to know it well enough to be able to instruct a
customer in its safe use.
Safety is a matter of common sense...a matter of thinking before acting. Most dealers have a list of specific good
safety practices...follow them.
The precautions listed in this Installation Manual are intended as supplemental to existing practices. However, if there
is a direct conflict between existing practices and the content of this manual, the precautions listed here take
precedence.
*NOTE: Please contact your distributor or our website for the applicable product data book referred to in this manual.
C US
®
(CATEGORY 1)
IO-242C 05/05
© 2005 Goodman Manufacturing Company, L.P.
INSTALLATION & OPERATING
INSTRUCTIONS for
GMS8, GDS8 and GHS8
GAS FIRED WARM AIR FURNACE
SINGLE STAGE