Graco Inc. Hydra-Clean 207-860 - Manual

306–993
Rev. D
Supersedes Rev. B
and PCN C First choice when
quality counts.t
INSTRUCTIONS-PARTS LIST
INSTRUCTIONS
This manual contains important
warnings and information.
READ AND KEEP FOR REFERENCE.
Hydra-Clean
)
Pressure Washers
42 bar, 4.2 MPa (600 psi) Maximum Working Pressure
For Mounting on Open 55 Gallon Supply Drum
(Can be wall mounted with accessory bracket)
Model 205–985, Series C
Includes 5:1 Ratio Monark Pump with Neoprene and
UHMWPE packings, drum mounting bracket, suction
hose, air line lubricator, 40 ft. spray hose,
Hydra–CleanR gun and spray tip.
Model 207–860, Series B
Includes 5:1 Ratio Monark Pump with UHMWPE and
PTFERpackings, drum mounting bracket, suction
hose and air line lubricator.
CAUTION
The Graco warranty will not apply if abrasive or
corrosive materials, other than those Graco recom-
mends are used with this unit.
GRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN 55440–1441
http://www.graco.com
ECOPYRIGHT 1996, GRACO INC.
Graco Inc. is registered to I.S. EN ISO 9001
06769A