Gdl 30a specifications, Ga 32 antenna specifications – Garmin 30A XM User Manual

Page 7

GDL 30A Installation Instructions

GDL 30A Specifications

Physical

Size:

in. W × 2 in. H × 6

in. D (121 mm W × 51 mm H × 172 mm D)

Weight:

1.5 lb. (.680 kg)

Case:

Fully gasketed, high-impact plastic and aluminum alloy, waterproof to IEC 60529 IPX7

temp Range:

From 5°F to 158°F ( from -15°C to 70°C)

Power

Source:

10–35 Vdc

usage:

18 watts max

Fuse:

AGC/3AG - 2.0 A

Data Output

Source:

Proprietary Garmin data format.

Audio

output Level:

300 mV rms into 47 kohm

Frequency Response: 10–20,000 Hz, ± 1 dB

Harmonic Distortion: <0.5%

GA 32 Antenna Specifications

Dimensions:

in. (91.6 mm) Diameter × 1

in. (49.5 mm) High

Weight:

7.1 oz. (201 g)

Case Material:

Fully gasketed, high-impact plastic alloy, waterproof to IEC 529 IPX7 standards

operating Range:

From -40°F to 176°F (from -40°C to 80°C)

Cable:

Foil-shielded, center conductor 18 AWG

Dynamics:

999 knots, 40g

note: When using the chartplotter and GDL 30A on battery power only (engines off) for extended periods of time, be sure there is enough available

amperage to run the units for the time period. Running other onboard devices at the same time may lower the available amperage, causing the

chartplotter and/or GDL 30A to shut off. Check with your local marine dealer/installer if problems persist.