GE 681131691031 - Manual (Page 11)

Figure #8
4. Close the water tank lid and place the empty carafe onto the warming plate.
5. Refer to “How to Set the Grind function“ to set the grinder off.
6. Refer to “How to Set Strong Feature“ to turn on this feature if desired.
7. Press the “ auto/on/off” button until the LCD displays “on”. The coffee maker will
automatically begin brewing. When brewing is complete, the coffee maker will beep three
times. The coffee maker will keep coffee warm and automatically turn off after two hours.
Five beeps will sound to signal the end of the two hour brewing/warming cycle.
Note
: During operation, you can take out carafe, pour and serve at any time. the
appliance will stop dripping automatically. replace carafe within 30 seconds to avoid filter
basket overfill.
8. To make another pot of coffee, turn off the coffee maker. Clean the unit per
instruction “Cleaning the Grinding and Brewing unit”. Repeat steps 1 through 7.
9. Be sure to turn off your coffee maker when no longer in use. Press the “auto/on/off“
button until the unit is off, then unplug the unit.
Program Brew Coffee with Pre-Ground Coffee
1. Set the program time, see “ How to Set the Programmed Time”.
2. Follow step 1 through 6 in the “ Brew Coffee with Pre-Ground coffee”
3. Press and hold “auto/on/off” button until the “auto” indicator is displayed on the
LCD. The coffee maker is now set to automatically brew coffee at the pre-set time. When
the brewing is complete the coffee maker will beep three times. The coffee maker will keep
coffee warm and automatically turn off after two hours. Five beeps will sound to signal the
end of the two hour brewing/warming cycle.
4. This coffee maker will NOT start again automatically the next day. To reset
OPERATING INSTRUCTIONS