Status indication, Wiring diagram – Gianni Industries GEM DG-101 User Manual
Page 2
Copyright Gianni Industries, Inc. All Rights Reserved.
P-MU-DG101 Ver. D Publish:2009.12.24 Page: 2/ 3
Ⅲ. Status Indication
Green On
Power on, Standby
Red On
First relay active
LED
Yellow On
Second relay active
1 Beep
Valid key press
2 Beeps
Enter, exit setting mode
3 Beeps
Incorrect operation
Beep
5 Beeps
Master Code back to 12345
Ⅳ. Wiring Diagram
Note:
The door strike or relay must have a varistor or a diode across the door strike terminals
to suppress the back EMF of the strike – failure to do so will damage the relay contacts
and electronic components, or even burns the controller.
Additional input for anti-tailgating function to ensure high security access control. If the
relay strike time set to 10 seconds and the door is closed in 3 seconds, the 7 seconds
will be cut off automatically.