Grizzly Safety Paddle G8988 User Manual

Model g8988 safety paddle switch, Instructions, Introduction

MODEL G8988

SAFETY PADDLE SWITCH

INSTRUCTIONS

For questions or help with this product contact Tech Support at (570) 546-9663 or [email protected]

WARNING: NO PORTION OF THIS INSTRUCTION SHEET MAY bE REPRODUCED IN ANY SHAPE

OR FORM WITHOUT THE WRITTEN APPROvAL OF GRIzzLY INDUSTRIAL, INC.

#ts13929 printed in ChinA

Figure 1. g8988 safety paddle switch.

Introduction

the Model g8988 features a large on/oFF pad-
dle with a removable safety key that can be used
to disable the switch. this switch is designed to fit
a

⁄

" x 1

⁄

" rectangular hole.

Specifications

rated Voltage ..................................... 125V/250V
rated Current at 125V ................................... 16A
rated Current at 250V ................................... 10A

To reduce risk of serious burns, electrocu-

tion or death when installing this switch:

• Only use this switch to replace an existing

machine switch that has the same physi-

cal configuration and equivalent electrical

specifications/ratings.

• Installation must only be performed by an

electrician or qualified service personnel,

and all applicable electrical codes must

be adhered to.

• Turn off and completely disconnect all

power sources to the machine before

installing the switch.

• Do not use this switch in wet or damp

locations, or near explosive fumes or

flammable liquids. It is not sealed or rated

for these environments.

• Make sure there is a verified machine

ground on the circuit this switch is

installed.