Gateway 205 User Manual
Gateway Projectors
Table of contents
Document Outline
- Contents
- Features
- Projector front
- Projector back
- Projector top
- Projector bottom
- Cables
- Remote control
- Setting up the projector
- Connecting components
- Connecting to your computer
- Tips & Tricks
- Operating the projector
- Starting the projector
- OSD options
- Important
- To adjust the OSD settings:
- 1 Press the MENU button. The OSD menu opens.
- 2 Move the joystick up or down to highlight a control, then press the Enterbutton.
- 3 Move the joystick left or right to adjust the control to the desired level.
- 4 Press the MENU button to return to the main navigation bar on the left of the OSD menu.
- 5 When you have finished making all adjustments, press the MENU button to exit the OSD.
- 1 Press the MENU button. The OSD menu opens.
- OSD menus
- Shutting down the projector
- To adjust the OSD settings:
- Warning
- Important
- Maintaining the projector
- Warning
- Warning
- To replace the lamp module:
- Screws
- Screw
- 7 Unsnap the lamp removal handle, then lift the lamp module straight up out of the lamp bay.
- 8 Gently press the new lamp module into the lamp bay. The lamp module is keyed so it can only be ...
- 9 Replace the lamp module retaining screw.
- 10 Replace the lamp bay access panel, then replace the access panel screws.
- 11 Turn the projector over.
- 12 Connect the power cable and all external cables.
- To reset the lamp timer:
- Cleaning the projector
- Warning
- Accessories
- Troubleshooting
- Specifications