Gefen 1:5 Splitter For HDMI 1.3 EXT-HDMI1.3-145 - Manual (Page 4)

The Gefen 1:5 Splitter for HDMI 1.3 allows set-top boxes, DVD players, Blu-
ray players and other HDTV devices with HDMI outputs to be connected to
up to fi ve HDTV displays (or more if multiple splitters are utilized in place of
HDTV displays
How It Works
The 1:5 Splitter for HDMI 1.3 is a distribution hub that sends the same HDMI
signals to up to fi ve HDTV digital displays. You simply connect your HDMI
video source to the 1:5 HDMI 1.3 Splitters HDMI input jack, then connect
your HDMI-compatible displays to each of the HDMI outputs. Power-cycle
all equipment and you should see beautiful, sharp HDMI video on all of your
HDMI displays.
INTRODUCTION
1
READ THESE NOTES BEFORE INSTALLING OR
OPERATING THE 1:5 SPLITTER FOR HDMI 1.3
Display information from the display connected to HDMI output port 1 is sent •
back to the source. Therefore, all other displays connected to the 1:5 Splitter
for HDMI 1.3 must be capable of accepting the timings and resolutions of the
display that is connected to HDMI output port 1. It is recommended that the
display with the lowest native resolution be connected to HDMI output port 1.
This is to ensure that a compatible video signal will be able to be displayed
on all connected monitors.
HDMI/HDCP compliant •
Compatible with all HDMI and DVI* displays •
*When used with a HDMI to DVI adapter
OPERATION NOTES