Hardware installation – Green-CleanUSA KV-P00801 User Manual
Page 8
8/16-Port PS/2 KVM Switch
8 / 26
4. Hardware Installation
Prior to installation please switch off all computer and peripherals. Following
guide is using 8-port PS/2 KVM as example. Please note 16-port PS/2 KVM has
similar hardware installation.
Step 1
Please open the package carefully and take out all required accessories to
prepare fluent installation. The size of device is 19”. For installation on rack
please install the rack-mount kit. Please measure the suitable distance
between PS/2 KVM and computer, keyboard, monitor and mouse before
installation.
Step 2
Plug power adaptor into PS/2 KVM and power socket. You will hear one beep
and port-1 red LED Constant lids.
Step 3
Please connect HDDB 15-pin blue connector on monitor to console port on
PS/2 KVM as illustrated below: