Global Machinery Company LS LINE/REDEYE - Manual (Page 3)

Description of symbols
The rating plate on your tool may show symbols. These
represent important information about the product or
instructions on its use.
Conforms to relevant standards for
electromagnetic compatibility.
Do not stare into beam. Only turn laser beam
on when tool is on work piece. Class 2 laser
product.
Specifications
Recommended Use: Indoor
Length of laser line: Up to 10m
Laser diode type: Red laser diode 650nm
Laser class: Class 2, maximum power
output less than or
equal to 1mW
Operation area:
Up to 10m distance and/or up
to 10m length of visible laser line
(with help of red laser enhancing
glasses, indoor)
Laser fan beam angle: 100°
Power supply:
2 x AA – 1.5 volt batteries
(not supplied)
Battery life:
40 hours of continuous use
with alkaline batteries
Operation temperature: -1°C to 40°C
Dimensions:
115mm x 54mm x 80mm
Weight: Unit only (no batteries) 240g
Base 90g
Batteries 50g
Accuracy: +/- 13mm at 10m
CAUTION. Laser radiation is emitted from the
line generator.
3
Dear Customer
If you require any help with your product, whether it
is a Warranty claim, spare part or user information,
please phone our Help Line for an immediate response.
Phone 1300 880 001 in Australia or 0800 445 721 in
New Zealand.
Introduction
Your new GMC laser hand tool will more than satisfy your
expectations. It has been manufactured under stringent
GMC Quality Standards to meet superior performance
criteria.
You will find your new tool easy and safe to operate,
and, with proper care, it will give you many years of
dependable service.
Caution. Carefully read through this entire Instruction
Manual before using your new GMC laser hand tool. Take
special care to heed the Cautions and Warnings.
Your GMC laser hand tool has many features that will
make your job faster and easier. Safety, performance,
and dependability have been given top priority in the
development of this tool, making it easy to maintain
and operate.
Environmental protection
Recycle unwanted materials instead of
disposing of them as waste. All tools, hoses
and packaging should be sorted, taken to
the local recycling centre and disposed of
in an environmentally safe way.