GE SHOWBIZ - Manual (Page 49)

GE LIGHTING - SHOWBIZ™ ENTERTAINMENT LIGHTING CATALOGUE 92
Axial coiled coil single ended lamps will generally give better reliability against
premature arcing if orientations in which the main support spine is under the filament are
avoided.
ANY VBD VBD=45° VBD=90°
VBD=105° HOR-4° HOR=90° VBU=90°
Fig. 1
The lamp must not be rotated in the filament
plane (or electrode plane).
Fig. 2
GE LIGHTING - SHOWBIZ™ ENTERTAINMENT LIGHTING CATALOGUE 93
Health and safety guide
Instructions for PAR64, PAR56, Closed Stage & Studio lamps Stage & Studio and Unshielded lamps
1 Disconnect from power supply before removing and/or replacing lamp or fuse
2 Install by holding the lamp cap and if necessary wear eye protection.
3 If the lamp is handled, clean before operation with lint free cloth moistened with alcohol or Methylated Spirits.
4 Avoid improper operation of the lamp e.g. at over voltage or at burning angles not designated for the lamp
type or rating. Operate inseries with a quick acting high breaking capacity fuse of suitable rating. Non
observation of these points may damage the lamp or equipment.
5 In operation:
(a) lamps develop a high internal pressure and could shatter
(b) lamps develop a high surface temperature
(c) direct exposure may cause UV irritation to skin and eyes
The use of glass or other UV filters is advised if the lamp is used in close proximity for a prolonged period.
Avoid operation in proximity to combustibles
Allow to cool before attempting replacement
6 Life expired lamps should be broken in a suitable robust container or wrapping to retain flying fragments.
There is a toxic content in the fill gas and larger quantities should only be broken in a well ventilated area
7 Always check that replacement lamps are the correct type for the application and that rating, cap and
control gear are correct
8 Lamps having outer bulbs must not be operated if the outer glass is broken