Graham Field 7931R - Manual (Page 2)

GF0500057RevD10 2
www.grahamfield.com
GF Health Products, Inc. is not responsible for typographical errors. Packaging, warranties, products and specifications are subject to change without notice. Graham-Field and Lumex are
registered trademarks of GF Health Products, Inc. Made in China. © 2010 GF Health Products, Inc., 2935 Northeast Parkway, Atlanta, GA 30360, tel 800-347-5678, fax 800-721-0601
8. Locate the four remaining screw knobs and curved washers.
a. 7921R (with backrest): The screw knobs will attach the backrest and
outer legs to the seat. Install curved washers on screw knobs. Lay seat
upside down on flat surface as shown in figure 7. Lay backrest tubes on
leg assembly, aligning holes. Insert screw knobs through backrest tube
holes, through leg assembly holes, and into seat bottom. Secure by
turning screw knobs clockwise; ensure screw knobs are tight without
overtightening.
b. 7931R (without backrest): The screw knobs will attach the outer legs
to the outer seat. Lay seat upside down on flat surface. Insert screw
knobs through leg assembly holes and into seat bottom. Secure by
turning screw knobs clockwise; ensure screw knobs are tight without
overtightening.
9. Attach leg extensions by pushing in the adjustment button, inserting leg
extension into leg, and moving to the desired height position — you will
hear it click into place (see figure 8, 7921R; or figure 9, 7931R).
12. Ensure that legs are locked at the same height, all leg adjustment buttons
protrude fully through adjustment holes, and all screw knobs are tight.
Contact your GF distributor immediately if you see any issue with fit, form,
function, or safety.
13. For more information on GF Health Products, Inc. parts and services,
please contact your distributor or www.grahamfield.com.
WARNING: Ensure that the Bath Seat is assembled as described. If the
Bath Seat is not properly assembled and installed, personal injury and
damage to the Bath Seat could result.
OPERATION
WARNING: Ensure all Bath Seat components are secure before each
use.
MAINTENANCE
WARNING: Check the Bath Seat weekly for signs of damage or crack-
ing. If damage or cracking of any component of the Bath Seat is found,
DO NOT use the Bath Seat. Contact your Graham-Field provider.
Inspect the Bath Seat weekly and tighten knobs as needed to ensure proper
installation.
To clean the Bath Seat, wash it with soap and water or a mild detergent, then
rinse. Ensure that the Bath Seat is rinsed well before use.
WARRANTY
GF Health Products, Inc. warrants the Lumex Bath Seat as follows:
Limited lifetime warranty against manufacturer’s defects. If a product is deemed to be under warranty, GF
Health Products, Inc. shall provide, at its option, (1) replacement of any defective part or product or (2) a
credit of the original selling price made to GF Health Products, Inc.’s initial customer. The warranty does
not include any labor charges incurred in replacement part(s) installation or any associated freight or ship-
ping charges to GF Health Products, Inc.
figure 7 (7921R)
figure 8 (7921R)
figure 9 (7931R)