Garrett Metal Detectors Sea Hunter Mark II None User Manual
Page 25
CAuTiONS
1. To avoid acid damage you should
install high-quality alkaline or nickel metal
hydride batteries and always remove
them prior to storing the detector.
2. If the battery compartment becomes
flooded, remove the batteries immediately,
rinse the compartment with fresh water
and allow to air dry. The electronics
compartment is factory sealed and
should never be opened. The see-
through "helmet mask" window on the
front panel should remain clean and free
from condensation. If the window ever
displays moisture, you should contact the
Garrett factory as soon as possible.
3. Before diving, always examine the
searchcoil and headphone connectors
and battery cap. Verify the battery
strength by operating the detector for a
couple of minutes prior to field use.