beautypg.com

Garmin USB Data Card Programmer User Manual

Page 12

background image

5

Installation

Installing a Data Card in the

Programmer

To Install a Garmin Data Card:

1. Insert the Data Card (Label up and pin connector end fi rst) into the

card slot in the Programmer (standard USB Programmer pictured
to the right).

For the Mini-USB Programmer, make sure the Garmin
globe logo on the Programmer is facing UP for proper
orientation.

2. Be certain to install the Data Card completely into the slot to be

sure the pin connections have been made.

3. To remove the Data Card, pull directly away from the Programmer

using the extractor handle on the Data Card.

Use care not to remove the Data Card from the Program-
mer until data transfer has been completed to avoid pos-
sible loss of data.

Disconnecting the Programmer from Your Computer

After the USB Data Card Programmer has been successfully

installed (hardware and software), disconnecting and reconnecting the
Programmer can performed without additional installation steps.

1. Before disconnecting the Programmer, be certain that no data

transfer is in progress.

2. Unplug the USB connector from your computer. You do not need

to turn the computer off before removing or inserting the USB
connector.

Extractor Handle

Disconnecting the Programmer

from Your Computer

,

,

USB DCP Manual.indd 5

12/18/2002, 4:14:39 PM