GE 169202 - Manual (Page 9)

9
OPERATION
Mode LCD display (2) shows
Drink timer
0:35
drink
Salsa timer
0:32
salsa
Press start/stop button (3) to start operation.
After completion of the countdown cycle, or if start/stop button (3) is pressed, the
blender goes back to standby mode.
Note: Timer for drink and salsa mode cannot be adjusted.
WARNING:
1. Always turn blender to “off” and unplug when not in use. Motor will continue to
rotate when a function button is pressed even if jar (17) is not mounted.
2. Never open the lid (19) during operation (ill. h ).
3. After 3 minutes without operation, blender automatically enters standby status.
4. If the blender stops for unkown reason, this might be because the motor speed
dropped below 1000rpm for more than 5 seconds. In this case the blender will stop
and go back to original setting mode.
•
•
169202-EN-10.indd 9 6/1/09 1:14:29 PM