Gefen GTV-DIGAUD-2-AAUD - Manual (Page 10)

How to Connect the Digital Audio to Analog Adapter
1. Connect an Optical and/or Coax cable from the audio source(s) to the Digital
Audio to Analog Adapter.
2. Connect a set of L/R analog RCA-type audio cables from the Audio L/R
output of the Digital Audio to Analog Adapter to the inputs of the A/V
equipment.
3. Connect the included 5V DC power supply to the power receptacle on the
Digital Audio to Analog Adapter and connect the AC adapter to an available
electrical outlet.
Wiring Diagram for the Digital Audio to Analog Adapter
6
CONNECTING THE
DIGITAL AUDIO TO ANALOG ADAPTER
GTV-DIGAUD-2-AAUD
Audio Receiver
Audio Source
Converter
L/R RCA ANALOG AUDIO CABLE
SPDIF OR TOSLINK DIGITAL AUDIO CABLE
IMPORTANT: Before connecting the included optical cable between
the audio source and the Digital Audio to Analog Adapter, be sure
to remove the clear plastic protective cover on both end of the
TOSLINK™ connectors as shown in the photos below. Use your
thumb and index fi nger to pinch the protective cover, then gently pull
to remove the cover from the TOSLINK™ connector.