Gossen SI 232-II - Manual (Page 6)

6 GOSSEN METRAWATT GMBH
3.6 Saving Measurement Data to the SI232/-II Memory Adapter
The memory adapter can be used with all multimeter versions.
Exception: Power and mains disturbance measurements (VAC + dropouts + peaks) with the
29Smultimeter can only be saved to internal multimeter memory.
Note: It is advisable to synchronize the clocks at the multimeter and the adapter before
starting memory mode operation.
3.7 Reading Out Measurement Data from the SI232/-II/-II Memory Adapter
and Configuring Adapter Parameters
SI232
Adr: 1
Baud: 9600
Mode: store
METRAHit 1x, 2x
Adr: 1
Adapter: SI232
store
rate:
send on
Rotary Switch:
set to measuring
function
SI232-II
Adr: 2
Bd-PC: 9600
Bd-MM: 8192
Mode: store
METRAHit 1x, 2x
Adr: 2
Adapter: SI232
* store/online
rate:
send on
Rotary Switch:
set to measuring
function
* online only with
METRAHit 28S or 29S und SI232-II,
otherwise select store.
SI232/-II
Adr: 1
Baud: 9600
Mode: pc
METRAHit 1x, 2x
Settings have no
significance.
SI232/-II
Adr: 2
Baud: 9600
Mode: pc
METRAHit 1x, 2x
Settings have no
significance.
METRAwin 10
Set/Device type ..., Set/Channels ...
File/Read memory
PC