Gossen SI 232-II - Manual (Page 23)

GOSSEN METRAWATT GMBH 23
Figure 4.5 LCD Test
• Internal Memory Test
Key Sequence: InFO
tiME
tESt diSP rAM no YES buSY
Settings: no = no memory test is performed
YES = the memory test is started without any additional security queries
After acknowledging YES with the ENTER key, the adapter’s internal memory is tested. Testing
takes about 5 minutes.
All data stored to memory are deleted during the memory test.
buSY appears at the display during testing.
PASS appears at the display when the test has been completed. The adapter is then returned
to its initial display by pressing the ENTER key.
Caution:
Make sure that all recorded measurement values which need to be saved have
been uploaded and archived at a PC before starting the memory test.
!