Gossen SI 232-II - Manual (Page 13)

GOSSEN METRAWATT GMBH 13
6.3 Shortcuts at the Multimeter
• Select Normal Operation
– Switch the device off, and then back on.
– Or, if the device is in the measuring mode: press the FUNC and ON keys simultaneously.
– Or, if a selection menu is open: select STORE - STOP and acknowledge with ON.
– Or, if the device is in the SEND mode: select SEND - OFF in the SET menu.
• Transmit Measurement Data to the Adapter – SEND Mode
– Switch the multimeter on by simultaneously pressing DATA and ON.
– Or, select SEND in the SET menu.
• Store Measurement Data at the Multimeter – STORE Mode
– Only applies to 22M, 26M and 29S multimeters
– Simultaneously press FUNC and ON with the multimeter switched on.