Gefen USB100 User Manual

Page 8

USB LED - Indicates if a USB connection is made properly

USB In - Attach USB cable (A-B) cable from computer to Sender unit here.

Link LED - Indicates a link between the USB•100S Sender and the USB•100R
Receiver units across the CAT5 extension cable.

Link Connector - CAT-5 Modular Jack (RJ-45) which connects to CAT5 cable
linking the USB•100S Sender and the USB•100R Receiver units

Power LED - Indicates the unit is plugged in and powered up properly.

15V DC Power Input Jack (Sender) - Used with an optionally purchased 15V DC
power supply when the host computer does not provide suffi cient power on the
USB bus.

Link LED - Indicates a link between the USB•100S Sender unit and the
USB•100R Receiver unit across the CAT5 extension cable.

Link Connector - CAT-5 Modular Jack (RJ-45) which connects to CAT5 cable
linking the USB•100S Sender and the USB•100R Receiver units

Power LED - Indicates the unit is plugged in and powered up properly.

15V DC Power Input Jack (Receiver) - Power jack for the included 15V DC Wall-
mount power supply.

USB LED - Indicates if a USB device is plugged in and seen by the host computer

USB Out - One USB A type connector for attaching the extended USB Peripheral.

USB•100 FUNCTION DESCRIPTION