beautypg.com

English, 1 standard cmos features, Date – GIGABYTE AMD Socket 939 Processor Motherboard GA-K8NMF-9 User Manual

Page 32: Time

background image

GA-K8NMF-9 Motherboard

- 32 -

English

2-1

Standard CMOS Features

Date

The date format is , , , .

Week

The week, from Sun. to Sat., determined by the BIOS and is display only.

Month

The month, Jan. Through Dec.

Day

The day, from 1 to 31 (or the maximum allowed in the month)

Year

The year, from 1999 through 2098.

Time

The times format in . The time is calculated base on the 24-hour military-
time clock. For example, 1 p.m. is 13:00:00.

IDE Channel 0 Master/Slave; IDE Channel 1 Master/Slave

IDE HDD Auto-Detection Press "Enter" to select this option for automatic device detection.
IDE Channel 0 Master/Slave; IDE Channel 1 Master/Slave

IDE devices setup. You can use one of three methods:

• Auto

Allows BIOS to automatically detect IDE devices during POST(default)

• None

Select this if no IDE devices are used and the system will skip the automatic
detection step and allow for faster system start up.

• Manual

User can manually input the correct settings.

Access Mode Use this to set the access mode for the hard drive. The four options are:

CHS/LBA/Large/Auto(default:Auto)

Hard drive information should be labeled on the outside drive casing. Enter the appropriate option
based on this information.

Cylinder

Number of cylinders

Head

Number of heads

Precomp

Write precomp

Landing Zone Landing zone
Sector

Number of sectors

CMOS Setup Utility-Copyright (C) 1984-2005 Award Software

Standard CMOS Features

Date (mm:dd:yy)

Tue

, Feb 1 2005

Time (hh:mm:ss)

22:31:24

` IDE Channel 0 Master

[None]

` IDE Channel 0 Slave

[None]

` IDE Channel 1 Master

[None]

` IDE Channel 1 Slave

[None]

` IDE Channel 2 Master

[None]

` IDE Channel 3 Master

[None]

` IDE Channel 4 Master

[None]

` IDE Channel 5 Master

[None]

Drive A

[1.44M, 3.5"]

Drive B

[None]

Halt On

[All, But Keyboard]

Floppy 3 Mode Suport

[Disabled]

KLJI: Move

Enter: Select

+/-/PU/PD: Value

F10: Save

ESC: Exit

F1: General Help

F5: Previous Values

F7: Optimized Defaults

Item Help
Menu Level`

Change the day, month,
year


Sun. to Sat.


Jan. to Dec.


1 to 31 (or maximum
allowed in the month)


1999 to 2098