Installation instructions, Connecting the dryer to the gas supply (cont.) – GE DPGT750 User Manual
Page 23
Install a 1/8” NPT plugged tapping to the
dryer gas line shut-off valve for checking
gas inlet pressure.
Install a flare union adapter to the plugged
tapping.
NOTE: Apply pipe compound or Teflon
®
tape to the threads of the adapter and
plugged tapping.
23
Installation Instructions
Attach the flexible metal gas line
connector to the adapter.
B
Tighten the flexible gas line connection
using two adjustable wrenches.
C
CONNECTING THE DRYER TO THE
GAS SUPPLY (cont.)
D
Tighten all connections using two
adjustable wrenches. Do not overtighten.
E
CONNECTING THE DRYER TO THE
GAS SUPPLY (cont.)
Apply pipe compound or
Teflon
®
tape to all male
threads.
Open the gas shutoff valve.
F
Shut-off Valve
Plugged
Tapping
See also other documents in the category GE Dryers:
- DBVH510GHWW (4 pages)
- DBXR453 (23 pages)
- DCCB330 (3 pages)
- DDG4580G (15 pages)
- DCCD330 (12 pages)
- 234D1050P001 (56 pages)
- 453 (16 pages)
- WPDH8800 (12 pages)
- DDC4400T (3 pages)
- DCCH43GF (3 pages)
- DBLR453GT (24 pages)
- PFMN440 (156 pages)
- DCCB330GDKC (3 pages)
- DCVH680GJMV (4 pages)
- DBXR453GAWW (3 pages)
- DCVH680GJBB (56 pages)
- DRSR495 (16 pages)
- EGD4500 (32 pages)
- 49-90418 (32 pages)
- 234D1157P003 (32 pages)
- DCSR483 (16 pages)
- DBXR463GGCC (3 pages)
- DCCB330EJ (3 pages)
- DPGT750GCPL (3 pages)
- UPSQ495GT (74 pages)
- Profile 513 (48 pages)
- DNCK440GA (3 pages)
- DLSR483EEWW (8 pages)
- DCCB330EDWC (3 pages)
- DLSR483EGWW (3 pages)
- 106588 (18 pages)
- DDE5300G (16 pages)
- 473 (16 pages)
- DCB330E (20 pages)
- UPVH890 (152 pages)
- 3300 (20 pages)
- DHDVH66 (56 pages)
- DCCB330GGWC (3 pages)
- DMCD330GHWC (3 pages)
- DWSR483 (16 pages)
- EED4500 (16 pages)
- 234D1157P002 (32 pages)
- 175D1807P596 (16 pages)
- DCCB330GJWC (3 pages)
- DPGT750EC (3 pages)