GE JGP337 - Manual (Page 24)

E1
Installation Instructions
24
The electrode of the spark igniter is exposed. Be careful not to push any cooktop controls while
the top of the burner is removed. Do not remove the top or touch the electrode of any burner
while another burner is turned on. Electrical shock might result.
Assembling the Cooktop Burners
a. Place the burner head on the burner bowl, so that the location of the spark igniter matches up
with the opening in the burner head.
b. Position the burner cap on the burner head. Make sure all burner heads and burner caps are
placed onto the correct base locations. See the Care and cleaning of the cooktop section for
correct locations of the burner parts.
c. Place the burner grate over the burner assembly and into the burner bowl. The bottoms of the
burner grates have fingers that fit into the corresponding indentations in the burner bowl.
Cooktop Burners
E
BURNER GRATE
BURNER CAP
BURNER HEAD
SPARK IGNITER
BURNER
BOWL