GIGABYTE GA-K8NS - Manual (Page 41)

BIOS Setup - 41 -
English
2-7 Frequency/Voltage Control
CMOS Setup Utility-Copyright (C) 1984-2005 Award Software
Frequency/Voltage Control
CPU OverClock in MHz [200]
AGP OverClock in MHz [66]
K8 CPU Clock Ratio [Default]
CPU Voltage Control [Normal]
VDDQ (AGP) Voltage Control [Normal]
DDR voltage control [Normal]
KLJI: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F7: Optimized Defaults
Item Help
Menu Level`
CPU OverClock in MHz
200MHz ~ 455MHz Increase CPU frequency as user selected.
AGP OverClock in MHz
66MHz ~ 100MHz Increase AGP frequency as user selected.
K8 CPU Clock Ratio
Default Set K8 CPU Clock Ratio to CPU factory default. (Default value)
x4 800Mhz ~ x10 2000Mhz.Set K8 CPU Clock Ratio from x4 800Mhz to x10 2000Mhz.
CPU Voltage Control
Normal Set VDDQ(AGP) voltage as AGP required. (Default value)
+5% Increase CPU voltage +5%.
+7.5% Increase CPU voltage +7.5%.
+10% Increase CPU voltage +10%.
VDDQ (AGP) Voltage Control
Normal Set VDDQ(AGP) voltage as AGP required. (Default value)
+0.1v Increase VDDQ(AGP) voltage +0.1V.
+0.2v Increase VDDQ(AGP) voltage +0.2V.
+0.3v Increase VDDQ(AGP) voltage +0.3V.
DDR voltage control
Normal Supply DDR voltage as DDR required. (Default value)
+0.1v Increase DDR voltage +0.1V.
+0.2v Increase DDR voltage +0.2V.
Incorrect using these features may cause your system broken. For power end-user use only.