GE PROFILE J2B918BEK - Manual

Dimensions and Installation Information
J2B918WEK/CEK/BEK
GE Profile ™ 30" Free-Standing Dual-Fuel Double Oven Range
Specification Created 12/04
221207
Note: Dimension from the wall to the front
of the closed door handle is 29”. Depth to
front edge of cooktop 25-1/4”. Factory set for
Natural Gas. A set of LP orifices is included
with each range for LP conversion.
Installation Information: Before installing,
consult installation instructions packed with
product for current dimensional data.
All GE ranges are equipped with
an Anti-Tip device. The installation
of this device is an important,
required step in the installation
of the range.
Dimension and installation information are shown in inches.
For answers to your Monogram, ® GE Profile ™ or
GE ® appliance questions, visit our website at
ge.com or call GE Answer Center ® service,
800.626.2000.
24
30" FS Gas Ranges-CL
30
8
4
9
2
2-1/2
Recommended area for
thru the floor connection
of pipe stub and shut-off valve
Recommended area for
120V outlet on rear wall
and area for thru the wall
connection of pipe stub
and shut-off valve
30
47-3/4
26-1/4*
46-3/8
36-1/4 ±1/4
Installation Information (Dimensions in inches)
Recommended common
area for gas outlet and
electrical outlet
CERTIFIED
7-1/2
2-1/4
30
4 8
3
CL
Recommended acceptable
electrical outlet area. Orient
the electrical receptacle so the
length is parallel to the floor.
Product is shipped with a 4-prong
plug. Recommended outlet is a
NEMA 14-50R receptacle.
Wall Mounted
J2B900_elec_locate.eps
Recommended area for electric outlet
7-1/2
2
30
3
3
9
3
CL
Recommended area for
through-the-wall connection
of pipe stub/shut-off valve.
Recommended area for
through-the-floor connection
of pipe stub/shut-off valve.
This area allows for
flush range installation
with the rear wall.
J2B900_gas_locate.eps
Recommended area for gas outlet