GE Money USA ASQ05 - Manual (Page 11)

PREPARE AIR CONDITIONER
Remove the backing from the top
mounting rail seal strip and attach it
to the bottom of the top mounting rail.
Cut to size.
Install the top mounting rail with 3 or 4
type A screws (depending on the number
of holes in the top mounting rail) from the
outside of the case.
3
A
B
Top mounting
rail
Bottom
mounting rail
Installation Instructions
WINDOW REQUIREMENTS
• These instructions are for a standard
double-hung window. You will need to
modify them for other types of windows.
• All supporting parts must be secured
to firm wood, masonry or metal.
• The electrical outlet must be within
reach of the power cord.
1
13
″ min.
22
″ to 36″
(With accordion panels)
STORM WINDOW REQUIREMENTS
A storm window frame will not allow the air
conditioner to tilt toward the outside, and will
keep it from draining properly. To adjust for
this, attach a piece of wood to the stool.
WOOD PIECES–
WIDTH: 2
″
LENGTH: Long enough to fit inside the
window frame.
THICKNESS: To determine the thickness,
place a piece of wood on the stool to
make it 1/2
″ higher than the top of the
storm window frame or the vinyl frame.
Attach securely with nails or screws
provided by the installer.
2
Models ASQ05, ASS05, ASV05, ASQ06, ASV06 only
(See below illustration for Models ASM05, ASM06,
ASQ08 and ASV08.)
Models ASM05, ASM06, ASQ08 and ASV08 only
(See above illustration for Models ASQ05, ASS05,
ASV05, ASQ06, ASV06.)
13 1 ⁄
2
″ min.
24 1 ⁄
2
″ to 36″
(With accordion panels)
11
1/2 ″ higher
than storm
window
frame
Storm window
frame
Wood
Stool
1/2 ″ higher
than vinyl frame
(on some windows)
Vinyl frame