Graco ISPC008BA 08/02 - Manual (Page 24)

LATCH Belt Routing:
LATCH belt MUST be routed through
the proper openings depending on direction
of car seat use.
A Remove pad from front of seat area by
pulling out 2-button clips on lower front
edge of car seat (fig. h)
Removing pad will expose the rotating
LATCH belt. (fig. i)
B Rotate LATCH belt so that the belt routes
through the proper openings (fig. j and
fig. k). Belts must remain flat and not
twisted.
C Re-attach pad to car seat by pressing
2-button clips back in place.
22
8
OPERATIONS and ADJUSTMENTS
(continued)
(fig. h)
(fig. i)
Rotating LATCH
Belt
(under seat pad)