GE 2-9824 - Manual (Page 3)

3
NOTE: Only use the Thomson power supply that came with this unit
(5-2378). Using other adapters may damage the unit.
1. Connect the handset cord into the handset and into the jack on the left
side of the base unit.
2. Plug one end of the telephone line cord into the jack marked PHONE
LINE on the back of the unit and plug the other end into a modular
wall jack.
3. Plug the smaller end of the power supply cord into the POWER jack on
the back of the answerer; plug the larger end into an AC power outlet.
4. Set the TONE/PULSE switch (on the right side of the unit) to TONE if
you have touch-tone service or to PULSE if you have rotary dial service.
D
ESKTOP
S
YSTEM
I
NSTALLATION
1
2
3