GIGABYTE AMD Socket 939 Processor Motherboard GA-K8VT890-9 - Manual (Page 37)

BIOS Setup - 37 -
English
2-4 Power Management Setup
ACPI Suspend Type
S1(POS) Set ACPI suspend type to S1/POS(Power On Suspend). (Default value)
S3(STR) Set ACPI suspend type to S3/STR(Suspend To RAM).
USB Dev WakeUp From S3
You can enable this function when ACPI Suspend Type set to S3(STR).
Disabled Disable this function. (Default value)
Enabled Enable USB device can wakeup system from S3.
Soft-Off by PWRBTN
Instant-off Press power button then Power off instantly. (Default value)
Delay 4 Sec Press power button 4 seconds to Power off. Enter suspend if button is pressed less
than 4 seconds.
AC BACK Function
Soft-Off When AC-power back to the system, the system will be in "Off" state. (Default value)
Full-On When AC-power back to the system, the system always in "On" state.
Memory When AC-power back to the system, the system will return to the Last state before
AC-power off.
Keyboard Power On
Disabled Disable this function. (Default value)
Password Enter from 1 to 8 characters to set the keyboard power on password.
Keyboard 98 If your keyboard have "POWER Key" button, you can press the key to power on the
system.
Mouse Power On
Disabled Disable this function. (Default value)
Enabled Enable to power on the system by mouse event.
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
Power Management Setup
ACPI Suspend Type [S1(POS)]
x USB Dev Wake-Up From S3 Disabled
Soft-Off by PWRBTN [Instant-off]
AC BACK Function [Soft-Off]
Keyboard Power On [Disabled]
Mouse Power On [Disabled]
PME/PCIE Event Wake Up [Enabled]
Modem Ring Resume [Enabled]
Resume by Alarm [Disabled]
x Date (of Month) Alarm Everyday
x Time (hh:mm:ss) Alarm 0 : 0 : 0
KLJI: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Item Help
Menu Level`