Goldmund SRM250 - Manual (Page 9)

User manual - SRM250 Power Amplifier | P 8
8
M A I N T E N A N C E
The GOLDMUND SRM250 amplifier usually requires no maintenance.
Always turn the power off before cleaning your amplifier. Use only a clean, soft, damp
cloth. Dampen with water or a mild detergent solution. Avoid abrasive or harsh cleansers
(eg. products containing sodium carbonate).
T E C H N I C A L D ATA
P O W E R
• Nominal power before clipping: 200 W RMS (2 - 8 Ohms).
120 W RMS (1 - 16 Ohms).
• Maximum power: > 400 W RMS (3 Ohms).
• Maximum voltage: 55 V peak. Maximum current : > 15 A peak.
• Maximum current: > 15 A peak.
F R E Q U E N C Y R E S P O N S E
These figures are valid for the circuit alone, at any level between 0 and nominal power.
• +/- 0.1 dB, 10 Hz - 1 MHz.
• +/- 1 dB, 6 Hz - 1.2 MHz.
• +/- 3 dB, 3 Hz - 1.4 MHz.
A N A L O G U E I N P U T S E N S I T I V I T Y
• Nominal level: 0.75 V.
• Input impedance: 50 kOhms.
G R O U P D E L AY
Propagation delay < 100 ns stable with frequency from DC to 200 kHz.
9