GE Bottom-Freezer Built-In Refrigerators - Manual (Page 8)

8
Temperature
controls
The temperature display shows the actual
temperature of the freezer and fresh food
compartments.
The actual temperature will
vary from the set temperature based on factors
such as frequency of door opening, amount of
food, defrost cycling and room temperature.
NOTE: Frequent door openings or door left
open for periods of time may increase the
internal temperature of the freezer and fresh
food compartments temporarily.
To turn off the cooling system in both the
freezer and fresh food compartments, press
either + pad until both displays show OFF.
To turn the cooling system on, press either
– pad. The preset temperatures of 0°F and
37°F will appear in the display.
To check the current temperature setting for
the fresh food or freezer compartment,
press
the + or – pad once. After 5 seconds, the
display will return to the actual temperature.
To change the temperature settings, press the
+ or – pads to desired temperature set point
for fresh food and freezer separately. Allow
24 hours for the refrigerator to reach the
temperature you have set.
Temperature Ranges
Low High
Fresh Food
Freezer
NOTE: Setting the controls to OFF stops cooling,
but does not shut off electrical power to the
refrigerator.
Changing
display
temperatures
from °F to °C To change the temperature display between
Fahrenheit and Celsius, press the Temp
Display °C/°F.
Door
alarm To turn the Door Alarm feature on, press
the pad once. The ACTIVE light will come on.
To turn it off, press the pad again.
When the DOOR ALARM
is active, the alarm will flash
and beep if you keep the
door open for more than
2 minutes.
Preset Settings
Allow 24 hours to reach these preset temperatures.
34°F
1°C
–6°F
–21°C
45°F
7°C
+6°F
–14°C
Operating Instructions
Bottom Freezer Refrigerator