Graco 8444 User Manual

Page 8

Text mode
Original mode

2.1 Removing and Attaching Base

2.2 Adjusting Handle

To remove infant restraint, squeeze release
handle at back of seat and lift infant
restraint from base as shown

To put infant restraint in base, push infant
restraint down until it clicks into base.
Pull up on infant restraint to be sure
it is latched firmly into base.

1. Press handle adjustment buttons on

both sides of handle

2. Rotate handle until it clicks into any

of three positions (for carrying,
reclining, or sitting). BOTH handle
adjustment buttons must pop out
to lock handle in place

3. Push and pull on the handle to be

sure it is locked firmly in position.

Carrying

Reclining

Sitting