Grandstream Networks Grandstream HandyTone HandyTone-488 User Manual

Page 23

HandyTone-488 User Manual

Grandstream Networks, Inc.

WAN side http

access:

Yes

(WAN side access to http server will be rejected if set to No)

PSTN access code:

(key pattern to use the PSTN line, default is "*00")

Update

Admin Password This contains the password to access the Advanced Web Configuration

page. This field is case sensitive.

SIP Server

SIP Server’s URI or IP address

Outbound Proxy

SIP Outbound Proxy Server’s URI or IP address

SIP User ID

SIP service subscriber’s User ID

Authenticate ID

SIP service subscriber’s Authenticate ID. Can be identical to or different
from SIP User ID

Authenticate
Password

SIP service subscriber’s account password

Name

SIP service subscriber’s name which will be used for Caller ID display

This parameter allows the user to specify the time frequency (in
minutes) the HandyTone ATA refreshes its registration with the
specified registrar. The default interval is 60 minutes (or 1 hour). The
maximum interval is 65535 minutes (about 45 days).

Local SIP port

This parameter defines the local SIP port the HandyTone ATA will listen
and transmit. The default value for FXS port is 5060. The default value
for FXO port is 5062.

Local RTP port

This parameter defines the local RTP-RTCP port pair the HandyTone
ATA will listen and transmit. It is the base RTP port for channel 0. When
configured, channel 0 will use this port _value for RTP and the
port_value+1 for its RTCP; channel 1 will use port_value+2 for RTP and
port_value+3 for its RTCP. The default value for FXS port is 5004. The
default value for FXO port is 5008.

Enable Call
Features

Default is No. If set to Yes, Call Forwarding & Do-Not-Disturb are
supported locally

Send DTMF

This parameter controls how DTMF events are transmitted. There are 3
ways: in audio which means DTMF is combined in audio signal (not very
reliable with low-bit-rate codec), via RTP (RFC2833), or via SIP INFO.