GPX C389B - Manual (Page 2)

COMPANY INFORMATION OPERATIONS
CONTROL GLOSSARY
© 2009 Digital Products International (DPI, Inc.) | All
other trademarks appearing herein are the property of
their respective owners. Specifications are subject to
change without notice
█ INTERNATIONAL SUPPORT
To download this User’s Guide in
English, Spanish, or French, visit the
support section at www.gpx.com.
Para transferir esta guía de usuario
en inglés, español, o francés, visite la
sección de la ayuda en www.gpx.com.
Pour télécharger ce guide de l’utilisateur
en anglais, espagnol, ou français, visitez
la section de soutien chez www.gpx.
com.
█ SERVICE INFORMATION
Address: 2116 Carr Street, St. Louis
MO, 63106
Phone: 1-314-621-2881
Fax: 1-314-588-1805
Email: [email protected]
Parts Email: [email protected]
Website: www.gpx.com
█ TUNING THE AM/FM RADIO
1. Press the Power/AL Off Button to turn
the unit on.
2. Press the AM/FM/AUX Button to
switch between AM and FM radio
modes.
3. Press the Tun+/Hr Button and Tun-/
Min Button to tune the AM or FM
radio.
Press and hold Tun+/Hr Button and
Tun-/Min Button to scan for the next
available AM or FM radio station.
█ SAVING A RADIO STATION TO
THE UNIT’S MEMORY
1. Tune the AM or FM radio to the desired
station.
2. Press the Memory Button.
3. Press the AL 1/P- Button or AL 2/P+
Button to select a numbered preset to
save the current radio station to.
4. Press the Memory Button to save the
current radio station to the selected
numbered preset.
Up to 10 AM and 10 FM radio stations
can be saved as presets.
5. With the unit powered on, press the
AL 1/P- Button or AL 2/P+ Button to
cycle through the saved AM or FM radio
stations.
█ TOP OF UNIT
• Power/AL Off Button
Press the Power Button to turn the unit
off and on.
Press the AL Off Button to turn the
alarm off, after it has sounded, until the
set time is reached again.
• AL 1/P- & AL 2/P+
Press the AL 1 and AL 2 Buttons to set
the alarms.
Press the P- and P+ Buttons to cycle
through saved preset radio stations.
• FM/AM/AUX Button
Press the FM/AM/AUX Button to cycle
through the FM, AM, and Auxiliary
modes.
• Clock Button
Press the Clock Button to set the unit’s
time.
• Snooze Button
Press the Snooze Button to delay the
alarm for an additional 9 minutes.
• AL 1 & AL 2 Buttons
Press and hold the AL1 or AL2 Buttons
to activate alarm 1 or alarm 2.
• Preset Button
Press the Preset Button to save the
current radio station as a preset.
Up to 10 AM and 10 FM radio stations
can be saved as presets.
• Time Zone Button
Press the Time Zone Button to cycle
through the unit’s available Time
Zones.
• Dimmer Button
Press the Dimmer Button to adjust the
brightness of the display.
• Tun +/Hr & Tun -/Min Buttons
Press the Tune Buttons to adjust the
AM or FM radio station.
Press the Hour and Minute Buttons to
set the hour and minute on the clock or
alarm time.
█ BACK OF UNIT
• DST Button
Adjust the DST Button to on when
your current time zone is in Daylight
Savings Time. Adjust the DST Button
to off at all other times of the year.
• Auxiliary Input
Use the Auxiliary Input to connect an
MP3 player or other audio source to the
unit.
Press the FM/AM/AUX Button to switch
the unit to Auxiliary Mode.
• FM Wire Antenna
Adjust the FM Wire Antenna to
improve FM radio reception.
An AM antenna is built into the unit.
Adjust the position of the unit to
improve AM radio reception.
• Reset Button
Press the Reset Button using a
paperclip or like object to reset the unit
to its default settings.
If you are experiencing problems with
the unit, pressing the Reset Button is
likely the quickest way to solve the
issue.