GIGABYTE AMD Socket 754 Processor Motherboard GA-K8NE - Manual (Page 43)

BIOS Setup - 43 -
English
2-7 MB Intelligent Tweaker(M.I.T.)
CPU Frequency
200 ~ 456 Set CPU frequency from 200Mhz to 456Mhz.
K8 CPU Clock Ratio
Default Set K8 CPU Clock Ratio to CPU factory default.
(Default value)
x5 1000Mhz ~ x10 2000Mhz Set K8 CPU Clock Ratio from x5 1000Mhz to x10 2000Mhz.
CPU Spread Spectrum
Disabled Disable CPU Spread Spectrum.
Center Spread Set CPU Spread Spectrum to Center Spread. (Default value)
PCIE Clock
100Mhz ~ 150Mhz Set PCI-E clock from 100Mhz to 150Mhz.
Robust Graphics Booster
Select the options can enhance the VGA graphics card bandwidth to get higher performance.
Auto Set Robust Graphics Booster to Auto. (Default value)
Fast Set Robust Graphics Booster to Fast.
Turbo Set Robust Graphics Booster to Turbo.
DDR voltage control
Please note that by overclocking your system through the increase of the DDR voltage, damage
to the memory may occur.
Normal Set DDR voltage control to Normal. (Default value)
+0.1V Set DDR voltage control to +0.1V.
+0.2V Set DDR voltage control to +0.2V.
Incorrect using these features may cause your system broken. For power end-user use only.
CMOS Setup Utility-Copyright (C) 1984-2005 Award Software
MB Intelligent Tweaker(M.I.T.)
CPU Frequency [200]
K8 CPU Clock Ratio [Default]
CPU Spread Spectrum [Center Spread]
PCIE Clock [100Mhz]
Robust Graphics Booster [Auto]
DDR voltage control [Normal]
KLJI: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F7: Optimized Defaults
Item Help
Menu Level`