Garland GMIU5.5 - Manual (Page 11)

Part # 4020897 (01/31/08) Page 11
TROUBLE SHOOTING
CAUTION Do not open the cooker, dangerous electric
voltage inside
The cookers may only be opened by authorized service
personnel.
Stop any actions if the heating area (Ceran plate) is cracked
or broken, the induction cooker must be switched off and
disconnected from the electric supply. Don’t touch any parts
inside the cooker.
Error Messages
Order of error message: The indicator lamp “ON” flashes for
an interval of 0.6 sec. The number of the following short
flashes has to be counted and indicating the kind of error
corresponding to the following mentioned code system.
NUMBER OF FLASHING
SIGNALS – CODE
SIGNIFICATION NOTES
-- No fault, normal operation
01 No spool current, Hardware overcurrent
02 High spool current, Software overcurrent ***
03 Temperature cooling plate
04 Temperature cooking platform, overheating *
05 Power rotary switch line break
06 Raised inside temperature
07 Sensing element of cooking platform, short circuit *
08
09
10
11
12
Power reduction cooling plate temperature **
13 Power reduction cooking platform temperature **
14 Power reduction caused by bad pan material **
* The induction unit continues working but the temperature of the cooking platform is not
controlled anymore.
** The induction unit continues working with reduced power cycles.
*** Bad pan material.