GPX TD2210B2 - Manual (Page 6)

GPX | TD2210B 6
GETTING STARTED - SETTING UP YOUR TELEVISION
Connecting a Cable or Satellite Receiver or RF Antenna
Auto Scanning for Channels
Basic Features
You will need: Coaxial Cable, an Over-the-Air or
Standard Antenna.
Connect the antenna’s output to the TV Antenna
Input on the television.
Power the television on and press the Source
Button to switch to TV Mode.
After you have connected the television to a power
source and an antenna or cable source, press the
Power Button to turn the tv on.
Press the Source Button to switch to TV Mode.
Press the Menu Button to access the televisions
preferences and setup menu.
Press the TV Navigation Buttons (▲/►/▼/◄/
Enter) to select the Channel preferences.
Adjust the Air/Cable setting to air if you have
hooked up an antenna, or cable if you have hooked
up a cable or satellite receiver.
Press the TV Navigation Buttons (▲/►/▼/◄/
Enter) to select Auto Scan.
HDMI
PC IN
R
L
Pr
Pb
Y
LINE IN
S- VIDEO
TV
ANTENNA
VIDEO
COMPONENT IN
A UDIO IN
R
L
VIDEO IN
Over-the-Air Antenna
Standard Antenna
Channel +/- Buttons
Press to adjust the channel of the television.
Volume +/- Buttons
Press to adjust the volume of the television.
Number Keypad
Enter in a number to go to that specific channel.
The number entered must match the channel
number exactly.
Mute Button
Press to mute the television.
TV Menu Button
Press to access the TV’s preferences and setup
menu.
TV Navigation Buttons (▲/►/▼/◄/Enter)
Press to navigate the TV’s on-screen menus.