Gaggenau ED221 - Manual (Page 15)

14
Setting the time of day
Proceed as follows:
– Press the
(Timer) key 3 times. The (Time
unit) symbol flashes on the display.
The time display shows the currently set time
of day (Fig. 15).
– You can select the required time by pressing
the + or – key.
– Press the (Confirmation) key to confirm the
entered value. An audible signal is sounded.
Fig. 15
After first installation or a power failure lasting
several hours, 08:00 and the time unit symbol will
flash in the display. You can set the current time by
pressing the + and – keys. 08:00 will be stored as
the time of day if you turn one of the control knobs.