GIGABYTE Pentium II Processor 6EA - Manual (Page 14)

Hardware Installation
3-4
t Soft PWR : Soft Power Switch
Pin No. Function
1 CTRL-Signal
2 GND
t FAN PWR : CPU cooling FAN Power Connector
Pin No. Function
1 GND.
2 +12V
3 SENSE
t J10 : System After Ac Back
Pin No. Function
1-2 Open Soft Off.
1-2 Close Full On.
t JP1 : Keyboard Power On Selection
Pin No. Function
1-2 Enabled Keyboard power on.
2-3 Disabled Keyboard power on.
t Wake on Lan
Pin No. Function
1 +5V SB
2 GND
3 Signal
t SB-LINK : For PCI Audio / Sound Card use only
Pin No. Function
1 Signal
2 GND
3 NC
4 Signal
5 GND
6 Signal